Bevel box project pricing
|
|
The
estimated costs - A
Bevel-Box reconditioned by us € 2.550,- ( until 01-06-2026). Option 1. Your M3W will be delivered to us in Lannemezan, France. Option 2. In case you first deliver your old Bevel box to us. In that case, you must pay €1.000,- in advance with the
order. And at the time of delivery, this € 1.000,- will be
deducted from the € 2.550,-. The first thing we do after receiving your Bevel box is
to check whether we can reuse that Bevel box. In case of, for example, broken parts, we can no longer
do anything with this bevel box. This settlement is therefore determined by the quality of
the old Bevel-box supplied by you. When returning a Bevel box that has been reconditioned by
us, in addition to the transport costs, a transport box developed by us will
be added (Cost of our box: € 65 ). DHL will charge approximately €75 for transport within
zone 3 in 2025. Option 3. If you would like to receive a reconditioned Bevel box
from us first, and only after receiving our reconditioned Bevel box do you
send us your old Bevel box. In that case, a deposit of € 1.500,- is also required in
advance with the order. The €1.500,- is determined by the average of the costs we
had to pay for the old, non-working Bevel boxes that we bought from
M3W-services. If your Bevel box meets our minimum repair requirements
(see option 2 above), you will receive your €1500 deposit back. In this case there are also additional costs for
transport and a transport box that is also necessary (Cost of our box: €
65 ). If you return your Bevel-box in the same crate (in which
we sent you the refurbished Bevel box) – and in good condition – you will
receive a €45 refund for the cost of this crate. We will retain € 20 for
depreciation of the crate. DHL will charge approximately €75 for transport within
zone 3 in 2025. -
Installation hourly rate for 2026 is €85. - We invoice and you pay in advance before delivery. All prices are exclusive of VAT. However, as a small
French business, we generally don't have to charge VAT. - Chain drive Phil Bleazey UKP 716 ( 2
years ago ) Additional
Installation costs max 2 hour when the Bevel box is also
installed by us. - Chain lubrication system € 100 - € 200
, depending on choice and installation. Additional Installation costs estimated ( depends of the
choice ) 2 hour when Chain-drive is installed by us . (*) - Phil Bleazey Bevel-Box mount UKP 916 ( 2
years past ) Additional Installation costs max 1 hour when the Bevel
box is also installed by us. - Upgrades Bevel-box (extra) The
following upgrades can be installed directly on the Bevel box. ( * ) Installation costs maximum
1 hour is included in case we also install the Bevel-box for you.
- The Bevel-box alignment device: € 60,- per piece. (
* ) Only when
combined with Phill Bleazey Bevel-Box support is installation
included in the price of the installation costs of our reconditioned
Bevel-Box.
- Rear-Wheel Front alignment device: € 80,- each. ( * )
Installation
maximum 2 hours - Chain drive Phil Bleazey : UKP 716 [price from 2
years ago]. (This is a separate package to be
shipped.) Installation
max 3 hours when the Bevel box is also installed by us.
- The Stahlbus drain costs : € 65,- to be installed by us. Installation
included. ( * ) - The PT100-temperature sensor costs € 35,- to be installed by us. Installation
included. ( * ) - A simple
aluminum air scoop/duct costs € 50,- to be installed by us. Installation takes a
maximum of 2 hours. Only in combination with a Phill Bleazey Bevel-box
support. In that case, installation is included.
- An additional 1
liter tank for the Bevelbox oil, including pipes and fittings, is installed
by us for €175. Installation takes a maximum of 3 hours. (*) |
|
